HomeStore

Grabber Wafer Framing Screws - Drill Point - Clear Zinc

Product image 1
1 / 5

Grabber Wafer Framing Screws - Drill Point - Clear Zinc

Designed for heavy gauge metal applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.

Installation Guidelines

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. P65 Warnings

Technical Data

Safety Data Sheet

Designed for heavy gauge metal applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.

Installation Guidelines

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. P65 Warnings

Technical Data

Safety Data Sheet

Select Size and Package Quantity
From $38.40

Original: $109.71

-65%
Grabber Wafer Framing Screws - Drill Point - Clear Zinc—

$109.71

$38.40

Description

Designed for heavy gauge metal applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.

Installation Guidelines

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. P65 Warnings

Technical Data

Safety Data Sheet

You may also like

-65%NEW
Thumbnail 1

FibaFuse™ 6" Paperless Drywall Tape - 75' Roll

$10.54

$3.69

-65%NEW
Thumbnail 1Thumbnail 2

Pliteq GenieClip® RST

$4.80

$1.68

-65%NEW
Thumbnail 1

FibaFuse™ 36″ Wide Wall Reinforcement

$47.22

$16.53

-65%NEW
Thumbnail 1Thumbnail 2

No Pock Pro 64 oz

$18.18

$6.36

-65%NEW
Thumbnail 1Thumbnail 2

Green Glue Commercial Noiseproofing Clips

$3.97

$1.39

-65%NEW
Thumbnail 1

Green Glue Applicator Gun

$130.87

$45.80

-65%NEW
Thumbnail 1

UCAN Tie Wire Anchor EP932

$25.45

$8.91

-65%NEW
Thumbnail 1Thumbnail 2

UCAN Super SCRU-IT®Anchors

$14.48

$5.07

-65%NEW
Thumbnail 1Thumbnail 2

UCAN SDS Plus Hammer Drill Bits

$4.70

$1.65

-65%NEW
Thumbnail 1Thumbnail 2

RefleXor All-In-One Thermo-Acoustic Sound Membrane (200sqft roll)

$214.49

$75.07

-65%NEW
Thumbnail 1

UCAN Zamac Pin Bolt (Nailin)

$13.10

$4.58

-65%NEW
Thumbnail 1Thumbnail 2

Strait-Flex Mid-Flex 300 – 3″ x 100′

$41.95

$14.68

Grabber Wafer Framing Screws - Drill Point - Clear Zinc | CSR Building Supplies